Tel:189-66298088

Nickel 200/UNS N02200/DIN W. Nr. 2.4060/ DIN W. Nr. 2.4066
| Form | ASTM |
| Rod and bar | B 160 |
| Plate, sheet and strip | B 162, B 906 |
| Seamless pipe and tube | B 161, B 829 |
| Welded pipe | B 725, B 775 |
| Welded tube | B 730, B 751 |
| Welding fitting | B 366 |
| Forging | B 564 |
Chemical composition
| % | Ni | Fe | C | Mn | Si | S | Cu |
| min | 99.0 | ||||||
| max | 0.40 | 0.15 | 0.35 | 0.35 | 0.010 | 0.25 |
Physical properties
| Density | 8.89 g/cm3 |
| Melting range | 1435-1446℃ |
Features: Nickel 200 is commercially pure wrought nickel. It is highly resistant to various reducing chemicals. It can also be used in oxidizing conditions that cause the formation of a passive oxide film, for instance its unexcelled resistance to caustic alkalis. Nickel 200 is limited to service at temperatures below 315℃, because at higher temperatures it suffers from graphitization which results in severely compromised properties. In that circumstance, Nickel 201 is used instead. It has a high Curie temperature and good magnetostrictive properties. Its thermal and electrical conductivities are higher than nickel alloys.
Applications: Useful for applications where maintaining product purity is considered such as handling of caustic alkalis, foods and synthetic fibers; electrical and electronic parts; aerospace and missile components; and chemical storage and shipping tanks
Seamless Pipe
Product Specification
| Product | Size Range |
| Stainless steel seamless tube & pipe |
OD: φ1-φ914.4mm WT:0.2-80mm |
| U-Tube |
OD: φ12-φ38mm WT: 0.5-4mm |
P.S As per special grade
Main Steel Type and Typical Grade
| Steel Types | Typical Steel Codes(AISI) |
| Austenitic | TP304/304L, TP304H, TP316/316L, TP316H, TP316Ti, TP321, TP321H, TP347/H, TP347HFG, 904L, TP309S,TP310MoLN,TP310H, TP310S, TP317/17L, TP316LMo≥2.5,S31254,904L; etc |
| Duplex/Super duplex | S31803; S32205; S31500; S32750; S32760 |
| Nickel-Alloy | UNS N08825, N08020, N08028, N08800,N08810,N08811,N04400,N06600,N06601,N06625,N06690,N06022,N10276,N10665,N10673, etc |
P.S As per special grade
Main Production Standards
| Standard Type | Standards |
| EN | EN10216-5; EN10216-2 |
| DIN | DIN 17456; DIN 17458 |
| ASTM |
ASTM A312, A213, A269, A511, A789, A790; B163, B423, B407, B668 ASME SA213, SA312, SA789, SA790; SB163, SB423, SB407, SB668 |
| JIS | JIS G3459; G3463 |
| GOST | GOST 9941; GOST 5632 |
| GB | GB/T14975; GB/T14976; GB13296; GB5310; GB9948 |


